<td id="ueu2b"><strike id="ueu2b"></strike></td>
  • <track id="ueu2b"></track>

    1. <pre id="ueu2b"></pre>
      1. <p id="ueu2b"></p>
        <p id="ueu2b"><label id="ueu2b"><xmp id="ueu2b"></xmp></label></p>
        1. 您好,歡迎來到煙臺威嘉機械設備有限公司官方網站。
          聯系我們

          煙臺威嘉機械設備有限公司

          網址:http://www.nallascrap.com

          固定電話: 0535-6328630

          聯系人:黃經理

          手機:15006550282

          E-mail:ytwj_huangwei@163.com

          地址:煙臺市福山區鳳凰山路216號

          YANTAI WINPLUS MACHINERY CO.,LTD

          Tel:0535-6328630

          Contact: Calvin Huang

          Mob:15006550282

          E-mail:ytwj_huangwei@163.com

          Add:No.216. Fenghuangshan Rd., Fushan Dist.,Yantai

          全自動間歇式預發機 EPS Pre-expanding Machine當前位置>首頁 > 產品展示 > EPS預發機EPS Pre-expandingMachine >
          詳細介紹
          全自動間歇式預發機 EPS Pre-expanding Machine




          1.稱料部分采用專用稱量控制器和載重單元,由觸摸屏與PLC控制可做到精準控制原料投入量,使偏差達到最?。ā?.05kg)。
          Material weight measuring section takes special measuring controlling device and loading device,they are controlled by Touch Screen and PLC,the infeed amount can? be controlled accurately,the tolerance can be the smallest(±0.05kg).
          2.料位控制方面采用韓國進口振動式發泡感應控制器,可正確感知發泡粒的上升度,維持發泡比重偏差為最小值(18-25g偏差在±1%)。
          For the material level controlling,the machine takes vibration Induction controller Which is imported from Korea,it can feel the rising rate of the beads,keeps the Expanding density as the min. Rate(tolerance ±1% for 18-25g)
          3.預發罐上裝有溫度控制裝置,能將發料爐的溫度變化控制到最小,達到節約熱能的效果。
          There is temperature controlling device in the pre-expanding vessel,it can control the temperature change into smallest level so that it can save the heat energy.
          4.汽水分離裝置能有效消除凝結水的發生及發泡粒的結塊現象,進而達到減少原料含水率的目的。
          Steam-Water discharge device can avoid the solidification of the water and the lumping of the foam, thus it can reduce the water entrainment rate of the material.
          5.機器運作中突然發生停止情況(如停電或機械發生嚴重問題)時,蒸汽閥會立即自動關閉,同時會自動供應空氣到發料爐內,以防止料在發料爐內結塊,為產品的品質提供雙重保障。
          When emergency accident happens (eg.power off or there are some serious problems with the machine), the steam valve can be automatically closed immediately,at the same time,the air can be infeed in the vessel automatically in case the material be lumped in the vessel.this can give double insurance for the product quality.
          6.友好的人機界面。觸摸屏控制系統可以自動檢測故障并發出警報,告知故障發生位置及修復方法,使維修更加簡便快捷。
          Friendly MML.Touch screen can automatically detect the default and send out alarm in order to inform the default position and repairing method,this will make maintenance more easy and quick.
          7.設備操作簡單??筛鶕煌?、不同克重來設定投料重量和各種設定參數并自由保存,以便下次預發時可直接提取使用,大大提高了工作效率。
          The equipment can be operated easily.The operator can set feeding weight and other relevant parameters according to different material and their different density,and the setting can be saved freely, this can help the operator output directly during next cycle, this can improve the working efficiency as possible.
          8.加熱底板為優質不銹鋼材質,采用精密激光切縫。加熱時蒸汽穿透更加順暢和均勻,使發泡比重更加穩定,顆粒更加均勻,并能減少蒸汽消耗,這樣可以很大程度的節約原料成本和能源成本。
          The heating base plate is made of high quality stainless steel and after precious laser cutting.During heating,the steam can pass through the base plate more smoothly and equivalently,this can make pre-expanding density more stable,the parcels will be more even,the steam exhaust can be reduced accordingly,this can save the material cost and the energy cost as much as possible.





          上一篇:已經是第一條了     下一篇:已經是最后一條了
          相關資訊
          相關產品
          青柠直播在线观看免费版